Hemingray.info
 
CD 144
Insulator Facts

Dimensions:3 7⁄8" H × 3 1⁄8" W
Primary Embossing:The Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
 NO EMBOSSING
Years Produced: c.1901
Rarity Scale 0. No specimens known
1. Extremely Common (millions known)
2. Very Common
3. Common
4. Fairly Common
5. Uncommon
6. Very Uncommon
7. Rare (dozens known)
8. Very Rare (less than a dozen known)
9. Extremely Rare (2 or 3 known)
10. Unique (only one known)
 Uncommon (5/10)
Usage: Power
Hobby Nickname: Foree Bain
Value Range: This is an estimated value range only, based on historical hobby collecting data. Insulator values vary widely depending on many factors, including embossing, color, condition, mold variations, manufacturing anomalies, and other attributes. Please visit the Hemingray Values page for more information.
 $100-350 (Typical: $125)
Please Note: This insulator style was also made by other manufacturers, not just Hemingray. This page will only detail the specific variant(s) manufactured, or suspected to be manufactured, by Hemingray.
Please Note: It is believed, though not proven, that this particular insulator style may have been manufactured by Hemingray.
Insulator Overview

This style is nicknamed the "Foree Bain." It was patented on December 23, 1890 by Foree Bain. The purpose of its unique design was to prevent a continuous film of moisture to form on the skirt, causing wire to short. On February 28, 1901, the patent was sold to Hemingray. It is believed that the unembossed versions may have been produced by Hemingray, although to date no shards have been found in the Hemingray dump to confirm this.

Related Links:
Known Embossing
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year AddedThis is the year that this embossing was officially recognized and added to the McDougald (1991-2008) or Briel (2011-2023) insulator price guides. It is not necessarily the year this embossing was discovered.
 Photo
Status✓ = In my collection

If the value in this column says WANTED, then that specific insulator is on my wanted list! If you have that insulator and would like to sell it, click on the WANTED link to submit photos and contact me.
NO EMBOSSING [010] [No embossing] {Foree Bain} {Inside of skirt has horizontal ridges from the base to the pinhole} {This is listed as smooth base, but the base has ridges that do not conform to any other base style} SB - Photo✓
Removed Embossing

The following embossing(s) were removed from the price guide because they could not be verified to exist, were consolidated with other embossings, or were otherwise ambiguous/inaccurate. They are preserved here for historical purposes.


Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 826

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 827

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 828

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 829

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 830

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 831

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 832

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 833

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 834

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 835

Notice: Trying to access array offset on value of type null in /hermes/bosnacweb04/bosnacweb04bc/b2315/ipw.songofth/public_html/personal/public/hemingray/database/detail.php on line 836
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
 Year Removed
n/a
Known Colors (4)
ColorThe color of the insulator.
Aqua
Blue Aqua
Green
Light Green