|
|
|
1. Insulator should be in-focus.
If your photos are turning out blurry, try moving the camera slightly further away from the insulator, or see if your camera has a macro (closeup) mode. Some cameras also allow for manual focus. |
2. Take the photo straight-on.
Bringing the camera down to eye level with the insulator (rather than up above, or bird's eye view) is necessary for reading the embossing. |
3. Photograph the entire insulator.
It's most helpful to see the entire insulator, rather than a small portion of it. |
4. The bigger the photo the better!
Photos up to 20MB in size are permitted. Bigger photos provide better detail. |
|